Sunniland Wholesale Roofing Supplies
Shingle | Tile | Metal | Flat Roof | Accessories | Specialty Applications

All aluminum products must meet the following specifications: The aluminum is ASTM B-209 It is .032 inch or .040 inch thickness Temper is H-14

Snap On Seam Panel

• Panels are installed over solid plywood sheathing or metal decking.
• Snap on seam panels come in 1.5" and 2" heights.
• The 1.5" high snap on seams are standard. They are available 11", 16", and 19" on center. The panel leg height is one inch. There are two optional "stiffening ribs." These are evenly spaced within the panel.
• The 2" high snap on seams are available 18" on center. The panel leg height is one inch. There are two optional "stiffening ribs." These are evenly spaced within the panel.

Snap On Batten Panels

• Panels are installed over solid plywood sheathing or metal decking.
• Snap on batten panels are 16" wide. The panel leg height is one inch. There are two optional "stiffening ribs." These are evenly spaced within the panel.

Structural Seam Panels

• Panels are installed over purlins, solid plywood sheathing, or metal decking.
• Structural seam panels come in 1.5" and 2" heights.
• The 1.5" high structural seam panels are standard. They are available 12", 16.75", and 20" on center with an integral standing seam. There are two optional "stiffening ribs." These are evenly spaced within the panel.
• The 2" high structural seam panels are available 12", 16.5", and 20" on center with an integral standing seam. There are two optional "stiffening ribs." These are evenly spaced within the panel.

Structural Snap On Batten Panels

• Panels are installed over purlins, solid plywood sheathing, or metal decking.
• Panels are available 14" high with an integral standing seam leg height of 1.5 inches. There are two optional "stiffening ribs." These are evenly spaced within the panel.
• The standing seams are crimped at 90 degrees.

Radius Panels

• Panels are installed over solid plywood sheathing, metal decking, or purlins. If installed over purlins, they must be installed at a maximum of 24" on center.
• The panels are available curved or non-curved.
• Non-curved 1" high snap on seams are available 12.75" and 20.75" on center. The panel leg height is 5/8 of an inch. There are two optional "stiffening ribs." These are evenly spaced within the panel.
• Curved 1" high snap on seams are available 12.75" on center. The panel leg height is 5/8 of an inch. Stiffening ribs are not available with the curved radius panel.

Snap Lock Panels

• Panels are installed over solid plywood sheathing or metal decking.
• Snap Lock Panels are available in 1" and 1.5" heights.
• Both 1" and 1.5" panels are available in a standard 13", 18", and 21" width.
• The 1" high snap lock panel has an integral standing seam leg height of one inch. There are two optional "stiffening ribs." These are evenly spaced within the panel.
• The 1.5" high snap lock panel has a continuous concealed button lock mechanism. There are two optional "stiffening ribs." These are evenly spaced within the panel.

Soffit Panels

• Soffit panels are available in widths of 12, 16, and 20 inches. The soffit leg depth is 3/4 of an inch.
• Stiffening ribs are not available with soffit panels.
• Panels are interlocked without needing clips. They are fastened according to local building code requirements, but should not exceed 24" on center.

Five-V-Crimp Panels

• Panels are installed over solid plywood sheathing. They may also be installed over battens, if they do not exceed 24" on center.
• Five-V-Crimp panels are 22.5" wide with a coverage area of 20.5 inches.